All Department
Computer Hardware

Dlink DGS-1210-20 16 PORT 10/100/1000MBPS + 4 PORT SFP WEBSMART SWITCH

Price:$189.0

Stock:Loading...

RRP:$199.0
Buy Now, Pay Later with  zipPay More info »
    • Milton1

    • Epping1

  • Qty:
    Minus Increase
  • Products Name:Dlink DGS-1210-20 16 PORT 10/100/1000MBPS + 4 PORT SFP WEBSMART SWITCH
  • Model#:DGS-1210-20
  • Brand:D-Link
  • Last Update:
  • Net Weight:3.500Kg
  • Warranty:36 Months
  • Interface:SFP
  • Form Factor :Rackmount
  • Data Rate:1000Mbps/1Gpbs
  • Ports:16

The DGS-1210-20 Web Smart switch with advanced management functions including SNMP, Web Management, SmartConsole Utility, and compact command line provides a complete and affordable solution for small and medium businesses.


The DGS-1210 Series is the latest generation of D-Link Web Smart Switches featuring D-Link Green 3.0 technology. The series complies with the IEEE 802.3az Energy Efficient Ethernet standard. Support for IPv6 management and configurations ensure your network remains protected after the upgrade from IPv4 to IPv6*. By offering multiple management options, the DGS-1210 series allows quick deployment, infrastructure expansion, and seamless function upgrades. Targeting small and medium-sized businesses, the DGS-1210 Web Smart Switches provide functionality, security, and manageability for a fraction of the standard cost of ownership. 


Energy Saving
DGS-1210 switches are capable of conserving power without sacrificing operational performance or functionality by using D-Link Green 3.0 technology. Using the Energy Efficient Ethernet standard, the network will automatically decrease the power usage when traffic is low with no setup required. For environments not fully supporting the standard, DGS-1210 switches offer advanced power-saving settings including port shutoff and standby, LED shutoff, and system hibernation based on custom time profiles.


The time profiles can also be applied to the PoE switch so that unnecessary power consumption can be saved during off hours. The DGS-1210 Series switches can also detect the length of connected cables to automatically reduce power usage on shorter cable connections.


Easy Management
The D-Link Web Smart Switch series is designed for easy management. All configurations can be made through a Web interface regardless of the host PC’s operating system. In the first installation, the SmartConsole Utility will automatically discover all D-Link Smart switches in the network, allowing administrators to assign IP addresses and the subnet mask quickly. It also allows simultaneous firmware upgrades to multiple switches, saving a great deal of time. Important management commands, such as download firmware or configuration file, offer a sophisticated method of batch operations for multiple switches.


Auto Surveillance VLAN and Voice VLAN
The D-Link Web Smart series automates the process of setting up IP surveillance and VoIP devices on a network. Auto Surveillance VLAN consolidates data and surveillance video transmission through the network, sparing businesses the expense of maintaining dedicated facilities. ASV also protects the quality of real-time video by grouping IP surveillance devices on a single high priority VLAN. This ensures that surveillance video streams will not be affected when ordinary data traffic are at their highest levels. Similarly, the Auto Voice VLAN guarantees clear quality and efficient transmission for all voice communication.


Extensive Layer 2 Features
Equipped with a complete line-up of L2 features, these switches include IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). The IEEE 802.3x Flow Control function allows servers to directly connect to the switch for fast, reliable data transfer. At 2000 Mbps Full Duplex, the Gigabit ports provide high-speed data pipes to servers with minimum data transfer loss. Network maintenance features include Loopback Detection and Cable Diagnostics. Loopback Detection is used to detect loops created by a specific port and automatically shut down the affected port. The Cable Diagnostic feature designed primarily for administrators and customer service representatives, can rapidly discover the type of error and determine the cable quality.


Secure your Network
D-Link’s innovative Safeguard Engine protects the switches against traffic flooding caused by virus attacks. The switches also support 802.1X port-based authentication, allowing the network clients to be authenticated through external RADIUS servers. In addition, the Access Control List (ACL) feature enhances network security and protects the network by screening traffic from illegal MAC or IP addresses. ARP Spoofing Prevention prevents malicious intruders from sending massive fake ARP messages through a manipulated source. This protects important data from being stolen by Man-in-the-Middle attacks, and prevents wasting CPU cycles on these packets. For added security, the DHCP Server Screening feature blocks rogue DHCP server packets from user ports to prevent unauthorized IP assignment.


* supported in firmware 3.10 and later

Features
  • Eco-friendly operation with D-Link Green Technology
  • IEEE 802.3az Energy Efficient Ethernet compliant
  • 40 Gbps Switching capacity
  • Web-based Management and Auto Discovery Utility
  • True Plug & Play
  • Fibre Media Support via 4 dedicated SFPs
  • DSCP and QoS with Auto Voice VLANs for VoIP
  • Advanced Security Features
  • IPv4 / IPv6 dual stack*
  • Fanless Design for Quiet Operation
  • Limited Lifetime Warranty
  • Advance Warranty Replacement (24 Hour Cross-shipment)


  • Port Standards & FunctionsIEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100BASE-TX
    Fast Ethernet
    IEEE 802.3ab 1000BASE-T
    Gigabit Ethernet
    IEEE 802.3x Flow Control
    for Full-Duplex Mode
    Auto-negotiation
    Number of Ports 16 10/100/1000 Mbps, 4 SFP
    Network Cables UTP Cat. 5, Cat. 5e (100 m max.)
    EIA/TIA-568 100-ohm STP (100 m max.)
    Full/Half Duplex Full/half duplex for 10/100 Mbps speeds
    Full duplex for Gigabit speed
    Media Interface Exchange Auto or configurable MDI/MDIX
    Switching Capacity 40 Gbps
    Transmission Method Store-and-forward
    MAC Address Table 16,000 entries per device
    MAC Address Update Up to 256 static MAC entries
    Enable/disable auto-learning of MAC addresses
    Maximum 64 bytes packet forwarding rate 29.8 Mpps
    Packet Buffer Memory 1 MB per device
    AC Input 100 to 240 VAC 50/60 Hz internal universal power supply
    Maximum Power Consumption 14.06 W
    Standby Power Consumption 6.7 W/110 V, 7.2 W/240 V
    Fan Quantity 0
    Acoustics 0 dB(A)
    Heat Dissipation 47.97 BTU/hr
    Operating Temperature -5 to 50 ËšC (41 to 122 ËšF)
    Storage Temperature -20 to 70ËšC (-4 to 158 ËšF)
    Operating Humidity 0% to 95% non-condensing
    Storage Humidity 0% to 95% non-condensing
    Dimensions 440 x 140 x 44 mm (17.32 x 5.51 x 1.73 inches)
    19” standard rack mounting width, 1U height
    Weight 2.2 kg (4.85 lbs)
    Diagnostic LEDs Power (per device)
    Link/Activity/Speed (per 10/100/1000 Mbps port)
    Link/Activity/Speed (per SFP port)
    MTBF 253,460 hours
    Certifications FCC Class A
    CE Class A
    ICES-003
    VCCI Class A
    C-Tick
    BSMI
    Safety cUL
    CE LVD

     


     

    Reviews
    • All Review(0)
    • Good(0)
    • Average(0)
    • Bad(0)
    • Show My Order(0)
    Service
    Warranty:Manufacture Warranty
    Phone number:QLD:0733693928;VIC:MSW: Website:http://www.umart.com.au
    Dead on Arrival (DOA) Returns:If your product is dead within the first 15 Days of purchase, upon we will give you an on the spot solution whether it be replacement or credit*
    Change of Mind Returns: Return your purchase within 30 Days for any reason for a credit or refund*Please note, upon inspection Umart has the right refuse the return or charge up to a 20% restocking fee if the product is not in a saleable condition*
    Warranty:If your product is broken and still under warranty (Umart or Manufacturer), Umart can arrange a solution for you for said product(Terms and Condition)

    Contact Us: Here !
    Important Note:

    Notes:Product information is drawn from suppliers and manufacturers. Check manufactures above for the most up to date information,While we make every effort to keep this site current and error free, we cannot honour errors such as outdated or incorrect prices,specifications.Prices and specifications can change without notice. Pictures are for illustration purposes only.

    Q&A
    Can I have this item delivered to me?

    Yes! At the top left hand corner select the ‘Delivery Store’ for delivery to anywhere in Australia. Additionally, this will also show you the stock levels for all items available for delivery.

    Can I Click & Collect from one of your stores?

    Yes! At the top left hand corner select the store closest to you. Here you can pre order your product online and then come into store to pickup. Additionally, by selecting a store, you will be able to see all products in stock at said store.

    Can I walk in store to purchase?

    Yes! Feel free to come into any of our stores, one of our sales staff will be more than happy to help you. However, we do recommend pre ordering online as this will secure stock for you and save processing time in store.

    How long does shipping take?

    If the items are in stock, please allow 1 business day for handling and 2-5 business days for shipping. Please note: delays may occur during holiday and peak periods or extreme weather conditions.

    How long does it take for my order to be processed?

    For delivery orders, please allow 1 business day before dispatch. For pick up orders, please allow for 3 business hours for processing*

    When will you have more stock of this product?

    Sorry, we didn't have stock of the item you wanted. Please check the description for the estimated time of arrival. Alternatively, contact us Here

    Need more help?

    Please check out our help centre Here or alternatively contact us Here

    Terms Condition?