Level up to unmatched performance, power efficiency and endurance
If you're a heavy workload professional searching for an SSD with uncompromising power and performance, look no further. The next-generation Samsung 950 PRO delivers exceptional performance for professionals.
Experience a next-generation SSD today
Equipped with the enhanced bandwidth of the NVMe interface, the 950 PRO is ideal for intensive workloads, such as computer-aided design, data analysis and engineering simulations. It outperforms SATA SSDs by over 4.5 times in sequential read and by over 2.5 times in sequential write, delivering the speeds of 2,500 MB/s and 1,500 MB/s respectively.*
Save power while maintaining peak performance
If you're in the midst of performing a complex data analysis or engineering simulation on your laptop, you surely don't want to run out your battery. Compared to SATA SSD power consumption, the 950 PRO is up to 1.5 times* more power efficient, so your battery will last longer and maintain superior performance levels.
Maximize endurance under heavy workloads
The innovative V-NAND technology in the 950 PRO increases endurance and prolongs the lifespan with insulators that cause less stress and are more resistant to wear under heavy client workloads over a 5-year period.* The 950 PRO also features Dynamic Thermal Throttling Protection technology, which controls the temperature of the device to reduce overheating and maintain a high level of sustained performance.
|General Feature||Application Client PCs|
Capacity1) 512 GB (1GB=1 Billionbyte by IDEMA)
Form Factor M.2 (2280)2)
Interface PCIe 3.0 x4 (up to 32 GB/s) NVMe 1.1
Dimension (LxWxH) Max. 80.15 x 22.15 x 2.38 (mm)
Weight Max. 10g (512GB)
NAND Type Samsung V-NAND
Controller Samsung UBX controller
Cache Memory Samsung 512 MB Low Power DDR3 SDRAM
|Special Feature||TRIM Support TRIM Supported (Required OS support)
S.M.A.R.T Support S.M.A.R.T Supported
GC (Garbage Collection) Auto Garbage Collection Algorithm
Data Security AES 256-bit for User Data Encryption
TCG Opal Family Spec and eDrive(IEEE1667) to be supported by FW update
|Performance||Sequential Read Up to 2,500 MB/sec
Sequential Write Up to 1,500 MB/sec
(4 KB, QD 32, Thread 4) Up to 300,000 IOPS
(4 KB, QD 32, Thread 4) Up to 110,000 IOPS
(4 KB, QD 1, Thread 1) Up to 12,000 IOPS
(4 KB, QD 1, Thread 1) Up to 43,000 IOPS
|Environment||Power Consumption4) Active average 5.7W, Maximum 6.4W,
Idle : 70mW, Device Sleep Mode Support (L1.2 mode): 2.5mW
Reliability (MTBF) 1.5 Million Hours Reliability (MTBF)
Operating Temperature 0 Â°C to 70 Â°C (Measured by SMART Temperature. Proper airflow recommended)
Humidity 5% to 95%, non-condensing
Vibration 20~2000Hz, 20G
Shock 1500G , duration 0.5m sec, 3 axis
|Software||Management SW Magician Software for SSD management|
|Warranty||5 Year Limited Warranty or 200 TBW Limited Warranty|
|Note||1) Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise)
2) M.2 is a specification of form factor for ultra-thin PCs, The M.2 standard allows widths 12, 16, 22 and 30mm and lengths of 16, 26, 30, 38, 42, 60, 80 and 110 mm, Commercially M.2 is popular with width 22mm and lengths 30, 42, 60 , 80 and 110mm. Samsung provides the most popular form factor with 22mm X 80mm model (i.e., 2280) to consider user convenience.
3) Sequential performance measurements based on CrystalDiskMark 5.0.2, and Random performance measurements based on Iometer 1.1.0. Performance may vary based on SSDâ€™s firmware version, system hardware & configuration. Test system configuration: Intel Core i5-6600K @ 3.5GHz, DDR3 1600MHz 8GB, OS â€“ Windows10 x64, Mainboard: MSI (Skylake), Model : Z170 KRAIT Gaming
4) Power consumption measured with IOmeter 1.1.0 with Intel i7-4770K(Haswell, 3.5GHz), DDR3 8GB, ASRock Z87 Extreme9/ac, APST on, OS- Windows7 Ultimate x64 SP1
Notes：Product information is drawn from suppliers and manufacturers. Check manufactures above for the most up to date information,While we make every effort to keep this site current and error free, we cannot honour errors such as outdated or incorrect prices,specifications.Prices and specifications can change without notice. Pictures are for illustration purposes only。
Yes! At the top left hand corner select the ‘Delivery Store’ for delivery to anywhere in Australia. Additionally, this will also show you the stock levels for all items available for delivery.
Yes! At the top left hand corner select the store closest to you. Here you can pre order your product online and then come into store to pickup. Additionally, by selecting a store, you will be able to see all products in stock at said store.
Yes! Feel free to come into any of our stores, one of our sales staff will be more than happy to help you. However, we do recommend pre ordering online as this will secure stock for you and save processing time in store.
If the items are in stock, please allow 1 business day for handling and 2-5 business days for shipping. Please note: delays may occur during holiday and peak periods or extreme weather conditions.
For delivery orders, please allow 1 business day before dispatch. For pick up orders, please allow for 3 business hours for processing*
Sorry, we didn't have stock of the item you wanted. Please check the description for the estimated time of arrival. Alternatively, contact us Here
Please check out our help centre Here or alternatively contact us Here