Ubiquiti Enterprise Access Hub (EAH-8)

Dimensions

379 x 355 x 105 mm (15 x 14 x 4.1")

Weight

Device: 9.1 kg (20 lb)
Mount: 624 g (1.4 lb)

Enclosure material

SGCC housing with PC cover

Mounting material

SGCC wall mount plate

HARDWARE

Networking interface

(10) 10/100/1000 Base-T

Power method

Universal input, 100–240V AC, Max. 4.4A, 50/60Hz
32–48V DC Lead Acid Battery, Max. 7.5A @32V

Power supply

AC/DC, internal

Max. power consumption

240W

PoE interface

(8) PoE (Pins 1, 2+; 3, 6-)

Voltage range PoE mode

44–57V DC

Total available PoE

60W

Max. PoE wattage per port

15.4W

LEDs

System: white/blue
Output relays: steady white
Ethernet: flashing white

Button

(1) Factory-reset

Digital input

(8) Inputs for request-to-exit devices
(8) Inputs for door position sensors
(1) Emergency

Dry output relay

(8) Lock terminals (12V or Dry)
(4) AUX terminals for advanced setup (Chime/Siren/Door opener)

Powered output relay

Lock: 12V DC, 1A/ Dry
Aux: Dry only

Recommend max. cable length

Operating environment

Indoor use only

Operating temperature

0 to 40° C (32 to 104° F) 

Operating humidity

5 to 95% noncondensing

Software information

The software version of a product can be checked at https://unifi.ui.com

UL 294 level

Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I

UL 294 statement

Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

PoE cabling requirements

Cable 5e cabling is the minimum   performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.

CAN/ULC-60839-11-1 Grade

Grade assignment: I

Certifications

CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document number, and issue   date and/or revision level

EAH-8, Ver 01

LED

System

Steady blue: adopted, device is ready
Steady white: pending adoption
Blinking white/blue: upgrading firmware
  Breathing white: system initiating

SOFTWARE

Management application

UniFi Access: Version 1.22.17 and later