Home  > PC Parts  > Networking  > Switches > Cisco SG220-26 26 Ports Gigabit Smart Plus Switch

Cisco SG220-26 26 Ports Gigabit Smart Plus Switch

Cisco SG220-26 26 Ports Gigabit Smart Plus Switch
  • Cisco SG220-26 26 Ports Gigabit Smart Plus Switch
or 4x fortnightly payments of $330 with ZipPay
Learn more
- +
Want to be notified when this item is available for order?

Please enter a valid email address

By clicking Let me know, you agree to our Terms & Conditions and to receive email updates and exclusive promotions, which you may unsubscribe from any time.

Add to Wishlist

   Free Pick Up  

Your store is set to:


   Fast Delivery  

Dispatched in 1-3 Days excluding Weekends

  Stock Levels May Vary

Make sure to have the correct store selected. Stock levels are different at every store!


  • Product Name:
    Cisco SG220-26 26 Ports Gigabit Smart Plus Switch
  • Model Number:
  • Brand:
  • Manufacturer Warranty:
    1 Year
  • Description

    Cisco SG220-26 26 Ports Gigabit Smart Plus Switch

    The Cisco 220 Series of affordable smart switches provide security, performance, and ease of use for small and midsize businesses on a restricted budget. Offered with limited lifetime warranty, these switches deliver a powerful combination of features, performance and ease of use. Build a simple, highly secure, and smart business network at a lower cost than you can with fully managed switches.

    Cisco SG220-26 26 Ports Gigabit Smart Plus SwitchSpecifications




    Switching Capacity

    Model name

    Forwarding rate in millions of packets per second (mpps; 64-byte packets)

    Switching capacity in Gigabits per second




    Layer 2 switching

    MAC table

    Up to 8,192 MAC addresses

    Spanning Tree Protocol (STP)

    Standard 802.1d Spanning Tree support, enabled by default

    Fast convergence using 802.1w (Rapid Spanning Tree [RSTP])

    Multiple Spanning Tree instances using 802.1s (MSTP)

    16 instances are supported

    Port grouping

    Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

      Up to 8 groups
      Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation

    Load balance based on source and destination MAC address, or source and destination MAC/IP


    Support for up to 256 VLANs simultaneously

    Port-based and 802.1Q tag-based VLANs

    Management VLAN

    Guest VLAN

    Auto voice VLAN

    Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS

    QinQ VLAN

    VLANs transparently cross a service provider network while isolating traffic among customers

    Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)

    Protocols for automatically propagating and configuring VLANs in a bridged domain

    Head-Of-Line (HOL) blocking

    HOL blocking prevention

    Jumbo frame

    Frame sizes up to 9,216 supported

    Loopback detection

    Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP.

    Automatic Media-Dependent Interface Crossover (MDIX)

    Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed.



    Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag

    Support up to 512 rules

    Port security

    Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses

    IEEE 802.1X (authenticator role)

    802.1X: RADIUS authentication; guest VLAN;

    Single-host, multiple-host, and multisession mode


    Supports RADIUS and TACACS authentication; switch functions as a client

    MAC address filtering


    Storm control

    Broadcast, multicast, and unknown unicast

    DoS protection

    DOS attack prevention

    STP Bridge Protocol Data Unit (BPDU) Guard

    This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port

    Spanning Tree Loop Guard

    This feature provides additional protection against Layer 2 forwarding loops (STP loops).

    Secure Shell (SSH) Protocol

    SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported

    Secure Sockets Layer (SSL)

    SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch


    Priority levels

    8 hardware queues per port


    Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS)

    Class of service

    Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS

    Rate limiting

    Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based

    Congestion avoidance

    A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization


    Internet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping

    IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups

    IGMP querier

    IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router



    IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab

    1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE

    802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE

    802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE

    802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC

    1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC

    2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC

    2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC

    1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC

    2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC

    1493, RFC 1215, RFC 3416



    IPv6 host mode

    IPv6 over Ethernet

    IPv6/IPv4 Dual Stack

    IPv6 neighbor and router discovery (ND)

    IPv6 stateless address auto-configuration

    Path Maximum Transmission Unit (MTU) discovery

    Duplicate Address Detection (DAD)

    ICMP version 6

    IPv6 ACL

    Drop or rate limit IPv6 packets in hardware

    IPv6 QoS

    Prioritize IPv6 packets in hardware

    Multicast Listener Discovery (MLD v1/2) Snooping

    Deliver IPv6 multicast packets only to the required receivers

    IPv6 applications

    Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, CDP, LLDP

    IPv6 RFCs supported

    RFC 4443 (which obsoletes RFC2463) - ICMP version 6

    RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture

    RFC 4291 - IPv6 addressing architecture

    RFC 2460 - IPv6 specification

    RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6

    RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration

    RFC 1981 - Path MTU discovery

    RFC 4007 - IPv6 scoped address architecture

    RFC 3484 - Default address selection mechanism


    Web user interface

    Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring

    Text-editable config files

    Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment

    Command-line interface

    Scriptable CLI; a full CLI is supported. User privilege levels 1 and 15 are supported for the CLI

    Cloud services

    Support for Cisco FindIT Network Manager


    SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM)

    Standard MIBs

    MIB-II (RFC1213)

    IF-MIB (RFC2863)

    Bridge-MIB (RFC4188)

    Bridge-MIB-Extension (RFC2674)

    RMON (RFC2819)

    Etherlike MIB (RFC3635)

    Radius Client MIB (RFC2618)

    Entity MIB (RFC2737)


    Syslog MIB (RFC3164)

    Generic Traps MIB (RFC1215)










    Remote Monitoring (RMON)

    Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis

    IPv4 and IPv6 dual stack

    Coexistence of both protocol stacks to ease migration

    Port mirroring

    Traffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported.

    Firmware upgrade

      Web browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP)
      Dual images for resilient firmware upgrades

    DHCP (Option 12, 66, 67, 82, 129, and 150)

    DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname

    Time synchronization

    Simple Network Time Protocol (SNTP)

    Login banner

    Configurable multiple banners for web as well as CLI

    Other management

    HTTP/HTTPS; TFTP upgrade; DHCP client; BOOTP; cable diagnostics; ping; traceroute; syslog



    The switch advertises itself using the Bonjour protocol

    Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED Extensions

    LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones.

    Cisco Discovery Protocol

    The switch advertises itself using the Cisco Discovery Protocol. Display brief information for connected Cisco network devices, IP phones, and wireless access points

    Minimum requirements

    Web configuration

    Browser: Internet Explorer 8 or later; Mozilla Firefox 20 or later; Google Chrome 23 or later; Safari 5.1 or later

    Power efficiency

    EEE compliance (802.3az)

    Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization

    Energy Detect

    Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down

    Active mode is resumed without loss of any packets when the switch detects the link up

    Disable port LEDs

    LEDs can be manually turned off to save on energy

    Time-based PoE

    PoE power can be on or off based on user-defined schedule to save energy

    Time-based port operation

    Link up or down based on user-defined schedule (when the port is administratively up)

    Pre-standard PoE

    Support Cisco Pre-Standard PoE

    Intelligent PoE power management

    Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification

    Table 2 outlines the hardware specifications for the Cisco 220 Series Smart Switches.

    Table 2.       Hardware specifications





    Reset button

    Cabling type

    Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5

    Ethernet or better for 1000BASE-T


    System, Link/Act, Speed


    32 MB

    CPU memory

    128 MB


    Model name

    Total system ports

    RJ-45 ports

    Uplink ports


    26 Gigabit Ethernet

    24 Gigabit Ethernet

    2 Gigabit Ethernet combo

    Packet Buffer

    All numbers are aggregate across all ports as the buffers are dynamically shared

    Model name

    Packet buffer


    4.1 Mb

    Supported SFP Modules




    Maximum distance


    Multimode fiber

    1000 Mbps

    550 m


    Single-mode fiber

    1000 Mbps

    10 km


    Single-mode fiber

    1000 Mbps

    40 km


    Single-mode fiber

    1000 Mbps

    40 km


    UTP Category 5

    1000 Mbps

    100 m


    Dimensions (W x H x D)

    SF220-24, SF220-48, SG220-26, SG220-50

    440 x 44 x 201 mm

    SF220-24P, SG220-26P, SG220-28MP

    440 x 44 x 250 mm

    SF220-48P, SG220-50P

    440 x 44 x 350 mm

    Unit weight

    SF220-24: 2.6 kg

    SF220-24P: 3.64 kg

    SF220-48: 2.98 kg

    SF220-48P: 5.12 kg

    SG220-26: 2.81 kg

    SG220-26P: 3.7 kg

    SG220-28MP: 4.26 kg

    SG220-50: 3.3 kg

    SG220-50P: 5.28 kg


    100-240 V, 50-60 Hz, Internal


    UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick

    Operating temperature

    0-50° C

    Storage temperature

    -20° C to +70° C

    Operating humidity

    10% to 90%, relative, noncondensing

    Storage humidity

    10% to 90%, relative, noncondensing

    Power Consumption

    Model name

    Green power (mode)

    System power consumption

    Power consumption (with PoE)

    Heat dissipation (BTU/hr)


    EEE + Energy Detect





    Acoustic Noise and Mean Time Between Failure (MTBF)

    Model name

    Fan (number)

    Acoustic noise

    MTBF @ 50°C (hours)


    No fan




    Warranty term

    Limited lifetime hardware warranty

    Package contents

    Package contents

      Cisco 220 Series Ethernet switch
      Power cord
      Mounting kit included in all SKUs
      Console cable
      Quick start guide

    Ordering information

    Table 3 provides ordering information for Cisco 220 Series Smart Switches.

    Table 3.       Ordering information

    Model name

    Order product ID


    Gigabit Ethernet



    24 10/100/1000 ports

    2 Gigabit RJ45/SFP combo port

    Each combo port has one 10/100/1000 copper Ethernet port and one SFP Gigabit Ethernet slot, with one port active at a time.

    The -xx in the product ID is a country/region-specific suffix. For example, the complete product ID of SG220-26 for the United States is SG220-26-K9-NA. Please refer to Table 4 for the suffix to use for your country or region.

    Table 4.       Country/region suffix for product ID




    USA, Canada, Mexico, Colombia, Chile and rest of LATAM






    EU, Russia, Ukraine, Israel, UAE, Turkey, Egypt, South Africa, Indonesia, Philippines, Vietnam, Thailand, India, Korea


    United Kingdom, Saudi Arabia, Qatar, Kuwait, Singapore, Hong Kong, Malaysia


    Australia, New Zealand




    People Also Bought