EK-CoolStream CE is a high-performance computer liquid cooling radiator which combines EK's unique CSQ design with latest radiator core engine. Built for EK-Vardar 140mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation.
EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream CE series radiators a perfect choice for any computer water cooled system.
This radiator offers best cooling capacity in the 45mm thick radiator class: Dual stack copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance.
This product features two recessed G1/4 threaded ports with pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-ACF series compression fittings.
Dimensions: 600 x 145 x 45mm (L x W x H) Weight: 2.06kg Liquid Capacity: ~470mL FPI: 16 Port threads: 2x G1/4 Fan compatibility: any standard size 140x140x25mm fan; UNC 6-32 thread tapping Pressure tested: 1bar(g)
- EK-CoolStream CE series radiator /w two pre-installed G1/4 extenders - Flat-head UNC 6-32 screws (l=30mm) - Flat-head UNC 6-32 screws (l=5mm) - Allen key 2,5mm
When using fans other than standard 140x140x25mm size please use appropriately long screws! Use of the improperly long screws may result in piercing of the radiator core and irrepairable damage the product. Such misuse is not covered by product warranty!
Threads G1/4 # of Fans 4
* Specifications are subject to change without notice. * Specifications may vary. * The product picture(s) is only for your reference, it may differ from the actual product.