Please choose a Location for Pickup or Post
All Department
Computer Hardware

EK-FB KIT ASUS R5-E10 - Acetal+Nickel

Price: $143.0

Stock:Loading...

RRP:$153.0
Buy Now, Pay Later with  zipPay More info »
    • Milton1

    • Epping1

  • Qty:
    Minus Increase
  • Products Name: EK-FB KIT ASUS R5-E10 - Acetal+Nickel
  • Model#: 3831109821619
  • Brand: ekwb
  • Last Update:
  • Net Weight: 2.000Kg
  • Warranty: 12 Months

EK-FB KIT ASUS R5-E10 - Acetal+Nickel
EAN: 3831109821619
EK-FB KIT ASUS R5-E10 is a complete liquid cooling solution for ASUS ROG Rampage V Edition 10 motherboard.

EK-FB KIT ASUS R5E-E10 is a complete liquid cooling solution for ASUS ROG Rampage V Edition 10 motherboard consisting of two separate water blocks. The water blocks directly cool Intel X99 Express southbridge (PCH) chip and power regulation (VRM / MOSFETs) module. Please note this water block cools exactly as much heat generating components as ASUS factory cooling solution. Both blocks utilize a very high flow design, allowing you to use it in loops with weaker water pumps.

The base of both water blocks is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber gaskets. Nickel plated brass screw-in standoffs are already preinstalled and allow for easy installation.

A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2mm (EK-ACF Fitting 10/16mm are the largest fittings that you can use) in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!



Check Compatibility list
Open Link
Specifications

2 water blocks (MOSFET & SB)
- Mounting mechanism
- Thermal pads
- Thermal grease EK-TIM Ectotherm

Made in Slovenia - Europe!

Additional Info Material / Design / Color option Nickel Acetal
Threads G1/4
PLEASE NOTE: Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
A maximum diameter of barbs/fittings on SB part of the water block kit must be 22.2mm (EK-ACF Fitting 10/16mm are the largest fittings that you can use) in order to allow the installation of the graphics card mounted with EK-FC series backplate in the first PCIe x16 slot!
Four fittings are needed for this water block to operate properly.
Factory backplate with RGB functionality is compatible with this kit.
ASUS ROG Rampage V Edition 10 I/O Shield is not compatible with this kit.

* Specifications are subject to change without notice.
* Specifications may vary.
* The product picture(s) is only for your reference, it may differ from the actual product.



EK-FB KIT ASUS R5-E10 - Acetal+Nickel

EK-FB KIT ASUS R5-E10 - Acetal+Nickel