The EK-RES X3 150 RGB is a versatile multiport standalone RGB reservoir with a pre-installed 4-pin 12V RGB LED strip. The number inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process.
PLEASE NOTE: - Do not use or clean reservoir with alcohol derivates or other solvents as acrylic may crack!
- Installation height: 150mm - Diamter: 60mm - Capacity: ~240ml - RGB connector classic 4-pin (12+ R G B)
- EK-RES X3 150 RGB - Pair of EK reservoir holders with mounting screws - 2 × G1/4 extenders - 4 × G1/4 Plugs - 1 × 2,5mm Allen key for reservoir holders - 1 × polyether anti-cyclone foam
Made in Slovenia - EU!
When using ports #3, #4 or #6 it is mandatory to use the enclosed EK-Extender G1/4" due to the ports being recessed into the plastic Reservoir Bottom. When using EK-Extender G1/4 make sure not to use fittings or barbs with G1/4" thread longer than 5mm! When using ports #1 and #2 make sure not to use fittings or barbs with a diameter larger than 25mm! The installed 4-pin RGB LED stripe is compatible with every major motherboard manufacturer and mainstream RGB controller. Port #6 of EK-RES X3 series reservoir should only be used to connect this reservoir with an external fill port. Do not clean reservoir with alcohol derivates or other solvents as the acrylic may crack!