EK-XRES 140 Revo D5 RGB PWM (incl. sl. pump) is a High-Performance water cooling pump with integrated reservoir. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This unit has black sleeved cables.
Pump electrical and mechanical properties:
- Motor: Electronically commuted spherical motor - Rated voltage: 12V DC - Power consumption: 23W - Maximum pressure head: 3.9m - Maximum flow: 1500L/h - Maximum system temperature: 60°C - Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal - Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector
- Reservoir diameter 60mm - Reservoir free volume: ~ 205mL - Overall unit height: 190mm - Mounting hole pattern: 65x34mm - RGB connector classic 4-pin (12+ R G B)
- PWM duty cycle: ~ 20-100% - Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
- EK-XRES 140 Revo D5 RGB PWM (incl. pump) - power cable with a black sleeve. - Mounting clip with rubber insert - Self-adhesive mounting hole pattern sticker - Anti-vortex PU foam and 12mm OD plexiglass tube - Mounting mechanism (incl. required Allen keys) - Installation manual
Made in Slovenia - EU! Pump motor made in Hungary - EU!
EK-D5 PWM G2 is an enhanced variant of the world renown Xylem D5 with improved power management control, which allows for better speed control trough motherboard BIOS or dedicated fan controller. The D5 pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry. The EK-UNI Pump Bracket bracket is just for showcase and it is not included with the unit. The installed 4-pin RGB LED stripe is compatible with every major motherboard manufacturer and mainstream RGB controller. Do not clean acrylic tube with alcohol derivates or other solvents as the acrylic may crack! This product should NOT be installed with any aluminum Fluid Gaming parts!