Categories
Home  > PC Parts  > Computer Parts  > Memory (RAM)  > DDR3 RAM > Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35

Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35

Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35
  • Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35
$121.0
RRP:$131.0    Save $10.0
or 4x fortnightly payments of $330 with ZipPay
Learn more
- +

Add to Wishlist

   Free Pick Up  

Your store is set to:

Loading...   

   Fast Delivery  

Dispatched within 1 business day

  

  Stock Levels May Vary

If you’re collecting from a Umart Store, don’t forget to choose a Pick Up location to see our live stock levels!

Specifications

  • Products name:
    Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35
  • Model #:
    HX318LC11FBK2/8
  • Brand:
  • Warranty:
    12 Months
  • Description


     
       

    HyperX HX318LC11FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR3L-1866 CL11 SDRAM (Synchronous DRAM) 1Rx8, low voltage, memory modules, based on eight 512M x 8-bit DDR3 FBGA components. Total kit capacity is 8GB. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. This module has been tested to run at DDR3L-1866 at a low latency timing of 11-11-11 at 1.35V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications areas follows:



    Data SheetDownload Link
    FEATURESJEDEC standard 1.35V and 1.5V Power Supply
       VDDQ = 1.35V and 1.5V
       933MHz fCK for 1866Mb/sec/pin
       8 independent internal bank
       Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
       Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
       8-bit pre-fetch
       Burst Length: 8 (Interleave without any limit, sequential with starting address œ000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
       Bi-directional Differential Data Strobe
       Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
       On Die Termination using ODT pin
       Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE ≤ 95°C
       Asynchronous Reset
       Height 1.291 (32.80mm) w/heatsink, single sided component
    JEDEC/PnP:DDR3L-1866 CL11-11-11 @1.35V/1.5V
       DDR3L-1600 CL10-10-10 @1.35V/1.5V
       DDR3L-1333 CL8-8-8 @1.35V/1.5V
    XMP Profile #1:DDR3L-1866 CL11-11-11 @1.35V


    * Specifications are subject to change without notice.
      * Specifications may vary.
      * The product picture(s) is only for your reference, it may differ from the actual product.



    Kingston 8GB (2x4GB) DDR3 1866MHz HyperX FURY Black Low Voltage 1.35

    Reviews