Please choose a Location for Pickup or Post
All Department
Computer Hardware

Kingston KVR16N11S8/4 4GB 1600MHz DDR3 CL11

Price: $49.0

Stock:Loading...

RRP:$59.0
Buy Now, Pay Later with  zipPay More info »
    • Milton1

    • Epping1

  • Qty:
    Minus Increase
  • Products Name: Kingston KVR16N11S8/4 4GB 1600MHz DDR3 CL11
  • Model#: KVR16N11S8/4
  • Brand: Kingston
  • Last Update:
  • Net Weight: 20Gram
  • Warranty: 12 Months
  • Type: DDR3
  • Total Capacity : 4GB
  • Sticks in Pack: 1x
  • Use: Desktop

 
   

This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600
 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

 

SpecificationsJEDEC standard 1.5V (1.425V ~1.575V) Power Supply
 VDDQ = 1.5V (1.425V ~ 1.575V)
 800MHz fCK for 1600Mb/sec/pin
 8 independent internal bank
 Programmable CAS Latency: 11, 10, 9, 8, 7, 6
 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
 8-bit pre-fetch
 Burst Length: 8 (Interleave without any limit, sequential with starting address œ000 only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
 Bi-directional Differential Data Strobe
 Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
 On Die Termination using ODT pin
 Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
 Asynchronous Reset
 PCB : Height 1.180 (30.00mm), single sided component


Kingston KVR16N11S8/4 4GB 1600MHz DDR3  CL11