Next Generation Wi-Fi 802.11ac with dual band support
Integrated Power over Ethernet Plus (PoE+)
Captive Portal
Cluster Management System
Wireless AC Speed up to 1750Mbps
Linksys Pro Series Wireless AC Dual Band Access Points deliver data rates at up to 3x faster than the 802.11n standard.* With bandwidth speeds up to 1750 Mbps, and wider 80 MHz channels your wireless network can grow without losing speed.
Single Point Control: Cluster
Cluster System Management simplifies administration and management efforts with a Single Point Control, simultaneously reducing the costs and complexity of managing multiple wireless access points.
Captive Portal
Linksys Pro Series Wireless-AC Dual Band Access Point implements a captive portal to support secure and customized guest Wi-Fi access and can be used at many Wi-Fi hotspots to control wireless access in the area.
3-in-1 Access Point, WDS & Workgroup Bridge
Supports deployment as a traditional access point, a wireless distribution system (WDS), or set up as a wireless bridge to extend wireless range.
Easy to Use with PoE+
Integrated 802.3at Power over Ethernet Plus (PoE+) capability eliminates external adapters and facilitate optimal placement.
Comprehensive Network Security
Protect and secure your wireless network with business class security features including Wi-Fi Protected Access (WPA/WPA2), 802.1X Supplicant Authentication, MAC-based ACL, Rogue AP Detection, SSID-to-VLAN Mapping, and more.
*Maximum Performance derived from IEEE Standard 802.11 specifications (draft specifications for 802.11ac). Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends upon many factors, conditions and variables, including products used, interference and other adverse conditions. 802.11ac 1300 Mbps in the 5GHz Band is approximately 3 x faster than 802.11n 450 Mbps in the 2.4GHz Band. An 802.11ac adapter will be needed to achieve 11ac data rates and up to 1300 Mbps wireless speeds may be achieved when connecting to other 802.11ac 1300 Mbps devices.
Model:
LAPAC1750PRO
Standards
IEEE 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac
Frequency
2.4 GHz and 5 GHz (concurrent)
MIMO
3 x 3
Antenna
Internal Antenna
RF Output Power:
High Power PA
PoE
802.3at
Installation Options:
Ceiling Mount, Wall Mount or Desktop
Ethernet Port:
2 Gigabit Ethernet Ports
Security Lock:
Kensington lock slot
LED:
One system LED
AC Power Adapter:
12V/1.5A
Hardware Reset Button:
Yes
Frequency Band and Operating Channels:
For FCC 2.412 to 2.462 GHz: channel 1-11 5.180 to 5.240 GHz: channel 36, 40, 44, 48 5.745 to 5.825 GHz: channel 149, 153, 157, 161, 165
247.00 x 238.00 x 43.30 mm (9.72 x 9.37 x 1.70 in)
Weight:
0.52 kg (1.15 lb)
Maximum Power Consumption:
24W
Compliance:
Class B, Wireless
Operating Temperature
0° to 35° C (32° to 95°F)
Storage Temperature:
-20° to 70°C (-4° to 158°F)
Operating Humidity:
10% to 85% (non-condensing)
Storage Humidity:
10% to 90% (non-condensing)
Regulatory Certification:
FCC, CE, IC
Warranty Period:
Limited Lifetime
Multiple SSIDs:
16
VLAN Support:
Yes
Number of VLANS:
17
SSID to VLAN Mapping:
Yes
Captive Portal:
Yes
Workgroup Bridge:
Yes
WDS Bridge:
Yes
IPv6
Yes
Access Control per SSID:
IPv4, IPv6, and MAC-based
DiffServ for QoS:
Yes
Rogue AP Detection:
Yes
802.1X Supplicant:
Yes
Channel Isolation:
Yes
WMM:
Yes
Single/Central Management System:
With Cluster
Bandwidth Utilization:
Yes
Scheduler
Yes
Band Steering
Yes
Beamforming:
Yes
Dual Image Support:
Yes
Management Access Control:
Mac and IP-based
Management Interface:
Web (http/https), SNMP
Event Notification :
Local Log, Remote Syslog, and Email Alerts
Network Diagnostics:
Log, Ping, and Packet Capture
* Specifications are subject to change without notice. * Specifications may vary. * The product picture(s) is only for your reference, it may differ from the actual product.
