Teltonika RUT950 Industrial Dual Sim 4G LTE Router

Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8   kbps

SIM switch

2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit,   roaming, no network, network denied, data connection fail, SIM idle   protection

Status

Signal strength, SINR, RSRP, RSRQ, Bytes sent/received

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL   to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply,   SMPP

Black/White list

Operator black/white list

Multiple PDN (optional)

Possibility to use different PDNs for multiple network access and   services

Band management

Band lock, Used band status display

WIRELESS

Wireless mode

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi

WPA2-Enterprise (with external/internal Radius server), WPA2-PSK,   WPA-PSK, WEP, MAC Filter

WiFi security

WPA2-Enterprise - PEAP, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes.   Client separation

SSID

SSID stealth mode and access control based on MAC address

WiFi users

Up to 100 simultaneous connections

Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, built in   customizable landing page

ETHERNET

WAN

1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE   802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN

3 x LAN ports, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards,   supports auto MDI/MDIX

NETWORK

Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3,   TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake   On Lan (WOL)

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of   VoIP packets

Connection monitoring

Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forward, traffic rules, custom rules

DHCP

Static and dynamic IP allocation, DHCP Relay

QoS

Traffic priority queuing by source/destination, service, protocol or   port, WMM, 802.11e

DDNS

Supported >25 service providers, others can be configured manually

Network backup

VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as   backup, using automatic Failover

Load balancing

Balance your internet traffic over multiple WAN connections

NetSnapper (optional)

Mobile connection management, data compression VPN client (not   available in standard FW)

SSHFS (optional)

Possibility to mount remote file system via SSH protocol (not   available in standard FW)

SECURITY

Authentication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via web-ui, unlimited   firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention,   HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST,   X-mas, NULL flags, FIN scan attacks)

WiFi security

WPA2-Enterprise – PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto   Cipher modes. Client separation

VLAN

Port based and tag based VLAN separation

Mobile quota control

Set up custom data limits for both SIM cards

WEB filter

Blacklist for blocking out unwanted websites, whitelist for specifying   allowed sites only

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

Multiple clients and server can be running simultaneously, 12   encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC,   RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5   encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/Server services can run simultaneously

Stunnel

Proxy designed to add TLS encryption functionality to existing clients   and servers without any changes in the programs' code

SSTP

SSTP client instance support

MODBUS

MODBUS TCP SLAVE

ID range

1-255

MODBUS TCP MASTER

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float   (Big endian, Big endian with byte-swapped, Little endian, Little endian with   byte-swapped)

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event   log, system log, kernel log

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS,   LibCWMP, Friendly tech, AVSystem

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

Management API over HTTP/HTTPS

MODBUS

MODBUS TCP status/control

RMS

Teltonika Remote Management System (RMS)

SYSTEM CHARACTERISTICS

CPU

Atheros Wasp, MIPS 74Kc, 550 MHz

RAM

128 MB, DDR2

FLASH memory

16 MB SPI Flash

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles,   configuration backup, restore point

FOTA

Update FW/configuration from server

RMS

Update FW/configuration for multiple devices

Keep settings

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell, Lua, C, C++

Development tools

SDK package with build environment provided

INPUT/OUTPUT

Input

1 x Digital non-isolated input (on 4 pin power connector)

Output

1 x Digital open collector output (30 V, 300 mA, on 4 pin power   connector)

Events

SMS, EMAIL, RMS

POWER

Connector

4 pin industrial DC power socket

Input voltage range

9 – 30 VDC (4 pin industrial socket), reverse polarity protection;   surge protection >31 VDC 10us max

PoE (passive)

Passive PoE over spare pairs. Possibility to power up through LAN   port, not compatible with IEEE802.3af and 802.3at standards

Power consumption

< 2 W idle, < 7 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet

4 x RJ45 ports, 10/100 Mbps

I/O’s

2 Inputs/Outputs pin on 4 pin power connector (available from HW   revision 1600)

Status LEDs

1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x   LAN status LEDs, 1 x Power LED

SIM

2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Power

4 pin power connector with 2 pins for Input/Output

Input/Output

2 programmable Inputs/Outputs

Antennas

2 x SMA for LTE, 2 x RP-SMA for WiFi antenna connectors

Reset

Reset/restore to default button

PHYSICAL SPECIFICATION

Casing material

Aluminium housing, plastic panels

Dimensions

50 mm x 100 mm x 110 mm (H x W x D)

Weight

280 g

Mounting options

DIN rail (can be mounted on two sides), flat surface placement

OPERATING ENVIRONMENT

Operating temperature

-40 °C to 75 °C

Operating humidity

10% to 90% non-condensing

Ingress Protection Rating

IP30

MTBF

270000 h

REGULATORY & TYPE APPROVALS

Regulatory

CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance

Operator

AT&T, Verizon

EMI IMMUNITY

Standards

Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301   489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2018), ANSI   C63.4 (2014)

ESD

EN61000-4-2:2009

RS

EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT

EN 61000-4-4:2012

Surge immunity (AC Power Line)

EN 61000-4-5:2006

Surge immunity (Ethernet ports)

EN 61000-4-5:2014, clause 7.1 of ITU-T K21

Transient and surges

ISO 7632-2:2004

CS

EN 61000-4-6:2009

DIP

EN 61000-4-11:2004

RF

Standards

EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301   908-2 V11.1.1, EN 301 908-13 V11.1.1 AS/CA S042.1:2018, AS/ACIF S042.3:2005,   AS/CA S042.4:2018, AS/NZS 4268:2017 FCC 47 CFR Part 15C, FCC 47 CFR Part 22H,   FCC 47 CFR Part 24E, FCC 47 CFR Part 27

SAFETY

Standards

IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 AS/NZS   60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310

ENVIRONMENTAL

Ingress Protect

LST EN 60529:1999+A1+AC:2002

Vibration

Class guideline-DNVGL-CG-0339:2016

EN 60068-2-6:2008