HARDWARE FEATURES  | 
  | 
Processor              | Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc  | 
Memory                | 64MB DDR2 RAM, 8MB Flash  | 
Interface               | 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) 1 Grounding Terminal     1 Reset Button    | 
Power Supply      | Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins) Voltage range: 16-27VDC                | 
Power Consumption         | 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.    | 
Dimensions ( W x D x H )                 | 8.8 x 3.1 x 2.4 in  | 
Antenna Type      | Built-in 13dBi 2 x 2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane)  | 
Protection             | 15KV ESD Protection 6KV Lightning Protection                | 
Enclosure              | Outdoor ASA stabilized plastic material IPX5 waterproof Certification       | 
WIRELESS FEATURES  | 
  | 
Wireless Standards            | IEEE 802.11a/n (with Pharos MAXtream disabled)  | 
Proprietary Protocol         | TDMA Mode (with Pharos MAXtream enabled)  | 
Wireless Speeds                 | Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic)         Up to 72.2Mbps (10MHz,Dynamic)            Up to 36.1Mbps (5MHz,Dynamic)               | 
Frequency            | 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.                  | 
Transmission Power         | 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.                | 
SOFTWARE FEATURES  | 
  | 
Wireless Configurations   | Pharos MAXtream TDMA Technology 802.11a/n Modes             Selectable Channel Width: 5/10/20/40MHz            Automatic Channel Selection       Transmission Power Control         Dynamic Frequency Selection (DFS)          WDS Enable/Disable        Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption            SSID Broadcast Enable/Disable    Multi-SSID with VLAN Tagging (AP mode only)      Distance/ACK Timeout Setting     Wireless MAC Address Filter        Wireless Advanced:         > Beacon Interval/RTS Threshold/Fragmentation                >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia              | 
Management      | Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management    System Log          SNMP Agent(v2c)             Ping Watch Dog  Dynamic DDNS   SSH Server            | 
System Tools        | Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory           Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer           Speed Test           Ping        Traceroute            | 
System-level Optimizations           | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog        | 
POE ADAPTER FEATURES  | 
  | 
Dimensions(W x D x H)     | 4.3 x 2.2 x 1.3 in  | 
Interfaces             | 1 AC Jack with Earth Ground 1 10/100Mbps Shielded Ethernet Port (Power + Data)      1 10/100Mbps Shielded Ethernet Port (Data)         | 
Button    | Remote Reset Button  | 
Power Status LEDs             | Green  | 
Input       | 100-240VAC, 50/60Hz  | 
Output   | 24VDC, 1A Max +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)      | 
Efficiency               | >80%  | 
Certifications       | CE/FCC  | 
OTHERS  | 
  | 
Certification         | FCC, RoHS, IPX5  | 
Package Contents              | Outdoor Wireless CPE 24V 1A Passive PoE Adapter         Pole Mounting Straps      AC Power Cord   Installation Guide              | 
System Requirements     | Google Chrome, Safari, and Firefox browsers for web GUI management  | 
Environment        | Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃   (-40℉~158℉)                Operating Humidity: 10%~90% non-condensing  Storage Humidity: 5%~95% non-condensing          |